Dr. Gordon Huang is a Tier 1 Canada Research Chair in Energy and Environment, and Executive Director of the Institute for Energy, Environment and Sustainable Communities at the University of Regina, Canada. He holds BSC from Peking University (China), MSc from Simon Fraser University (Canada) and PhD from McMaster University (Canada). Since the 1990s, Huang has led or been involved in over 100 environment-related research projects, produced over 600 peer-refereed international journal papers, and supervised over 100 Master/PhD students. He is the president of the International Society for Environmental Information Sciences. He has also served the United Nations as an international expert in the field of risk management for drinking water safety. The integrated simulation, optimization and risk assessment techniques which he proposed have been used by peers in studying water resources and environmental systems in a number of countries.

Professor Hong Hocheng has advised more than 60 Master and 20 PhD theses and published more than 175 journal papers and 40 patents in the area of manufacturing. His research interest lies in innovative manufacturing processes and recycling. He has been the principal investigator of more than 50 projects related to simulation/design of nontraditional machining, machining of composite materials, micro/nano-fabrication, reliability analysis of MEMS devices, and reclaim metals from industrial waste.

He is an Auxiliar Professor at ISEP – School of Engineering, Porto, Portugal. He completed the Título de Agregado in Habilitation in Mechanical Engineering in 2020 by Universidade do Porto Faculdade de Engenharia, Doutoramento in Ph.D. in Mechanical Engineering in 2009 by Universidade do Porto Faculdade de Engenharia, Mestrado in M.Sc. in Mechanical Engineering - Profile of Mechanical Constructions in 2006 by Universidade do Porto Faculdade de Engenharia and Licenciatura in Graduation in Mechanical Engineering - Transport Branch in 2003 by Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto. He is an Adjunct Teacher in Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, and Researcher in Associated Laboratory for Energy Transports and Aeronautics. He published 320 articles in journals. He has 136 section(s) of books and 23 book(s). He participated in 112 event(s). He supervised 5 PhD thesis(es) and e co-supervised 1. He Supervised 167 MSc dissertation(s) e co-supervised 73. He has received 16 awards and/or honors. He Participates and/or participated as Principal investigator in 1 project(s) and Researcher in 6 project(s). His research area includes material joining, adhesive joints, material characterization, polymers, composite materials, sandwich structures, advanced manufacturing systems, automation and robotics, industrial design, numerical modelling, finite element method, and cohesive zone models.

Dr Xing-Gang Yan received the B.Sc. Degree from Shaanxi Normal University, in 1985, the M.Sc. Degree from Qufu Normal University in 1991, and the Ph.D. Degree of Engineering from Northeastern University, China in 1997. Currently, he is Associate Professor of Control Engineering at the University of Kent, United Kingdom. He worked as a Research Fellow/Research Associate in the Northwestern Polytechnical University, and the University of Hong Kong, China, Nanyang Technological University, Singapore and the University of Leicester, United Kingdom. He was a Lecturer in Qingdao University, China from 1991 to 1994. He is an IEEE member, IET member, HEA Fellow and a Charted Engineer. He received the Best Application Paper Award of ASian Control Conference (ASCC) in Fukuoka, Japan in 2019, and the Outstanding Editor-in-Chief from Bilingual Publishing Group in 2022. He serves as the member of the Editorial Board of several engineering journals including IET Control Theory and Applications, Journal of Franklin Institute, Complexity and Energies etc., and the member of TPC for a number of international conferences. He has published three books, six invited book chapters and over 200 referred papers in the area of control engineering. His research interests including sliding mode control, decentralised control, fault detection and isolation, and time delay systems with applications.

Professor Lingai Luo is an Exceptional Class Research Director (ECRD) at the French National Center for Scientific Research (CNRS), based at the Laboratoire de Thermique et Energie de Nantes (LTEN-CNRS UMR6607) in France. With a vast research portfolio spanning thermal, process, and energy engineering, her work encompasses diverse areas such as combustion, energy balance analysis, solar refrigeration, adsorption processes, and thermoelectric heat pumps. She has also delved into solar energy, energy storage, and innovative fluidic, thermal, and reactive components. Professor Luo's expertise extends to energy system integration, optimization, and topology optimization assisted by machine learning. She advocates for a multi-scale approach to energy efficiency optimization, emphasizing the importance of intensification at local, component, and system scales. Her innovative strategies for fluid management aim to optimize fluid distribution in various devices and their integration into multifunctional systems. With numerous publications and editorial roles in prestigious journals, Professor Luo is recognized for her significant contributions to the field of energy engineering.

Dr. Xianguo Li is a Professor of Mechanical and Mechatronics Engineering, University Research Chair (2014-2021), and the Director for the Fuel Cell and Green Energy Laboratory at the University of Waterloo. His research interests include hydrogen generation and hydrogen fuel cells, liquid fuel atomization and sprays, and green energy systems, as well as the thermal management of power batteries for electric vehicles. Dr. Li has published extensively, including the book “Principles of Fuel Cells” (single-authored) and “Fuel Cells for Transportation: Fundamental Principles and Applications” (co-edited). He serves as the editor in chief for the International Journal of Green Energy, Field Chief Editor for Frontiers in Thermal Engineering; Vice President, Technical Program, Canadian Society for Mechanical Engineering; President of the Fuel Cell Division, International Association for Hydrogen Energy; and President, International Association for Green Energy (IAGE). He is a fellow of Canadian Academy of Engineering, Engineering Institute of Canada and Canadian Society for Mechanical Engineering

Professor Sam Zhang received his Ph.D. degree in Ceramics in 1991 from The University of Wisconsin-Madison, USA. In 2006 he was promoted to tenured full professor in Singapore Nanyang Technological University. In 2018 he established and served as Director of Centre for Advanced Thin Films and Devices in Southwest University, China. In 2023, he joined in the School of Aeronautics, Harbin Institute of Technology and also serves HIT Zhengzhou Research Institute (https://homepage.hit.edu.cn/samzhang). Prof. Zhang was elected as a Fellow of Royal Society of Chemistry (FRSC), a Fellow of Thin Films Society (FTFS) in 2018, and a Fellow of Institute of Materials, Minerals and Mining (FIoMMM) in 2007. Prof. Zhang was a Principal Editor for Journal of Materials Research (USA) for thin films and coating field (since 2003). Prof. Zhang has been serving the world’s first “Thin Films Society” (www.thinfilms.sg) as its founding and current president since 2009. Prof. Zhang has authored/edited 21 books published with CRC Press/Taylor & Francis. Currently, Prof. Zhang is working on a four-volume Materials for Energy Handbooks in Chinese to be published in 2024 by Chongqing University Press. Of these books, Materials Characterization Techniques has been adopted as textbook by more than 30 American and European universities alone as of October 2015. That book had also been translated into Chinese and published by China Science Publishing Co. in October 2010 and distributed nationwide in China (also available online at Amazon.cn). Prof. Zhang is also the Series Editor for Advances in Materials Science and Engineering Book Series published by CRC Press/Taylor & Francis. A full list of his books is at Amazon: https://www.amazon.com/-/e/B001JPBX42). Over the years, Prof. Zhang has authored/co-authored over 400 peer-reviewed international journal papers with h-index of 62 and total citation of over 13,500 times as of 29 May 2024 (https://publons.com/researcher/2817766/sam-zhang/).

Goran Strbac is a Professor of Energy Systems, with extensive experience in advanced modelling and analysis of operation, planning, security and economics of energy systems. He led the development of novel advanced analysis approaches and methodologies that have been extensively used to inform industry, governments and regulatory bodies about the role and value of emerging new technologies and systems in supporting cost effective evolution to smart low carbon energy future. He is currently Director of the joint Imperial-Tsinghua Research Centre on Intelligent Power and Energy Systems, Leading Author in IPCC WG 3, Member of OFGEM RIIO-2 Challenging Group, Member of the UK Smart System Forum, Member of the European Technology and Innovation Platform for Smart Networks for the Energy Transition, and Member of the Joint EU Programme in Energy Systems Integration of the European Energy Research Alliance. He co-authored 4 books and published over 200 technical papers. Research areas Whole-energy system modelling - Integration of multi-vector energy systems, across operation and investment timescales & local district and national level infrastructures. Energy market design - market for energy and flexibility services in low carbon systems, P2P trading, efficient network pricing, business models for decentralised operation and investment. Integration of renewable energy sources – role and value of emerging technologies and systems in supporting cost effective integration of variable renewable generation, system integration costs. Distributed energy resources - business case for energy storage technologies, value of demand side response, vehicle to grid. Security and resilience of future energy infrastructure – reliability performance of energy infrastructure, fundamental review of network operation and design standards. Energy planning under uncertainties – design of future energy systems under multi-dimensional uncertainties; option value of flexible technologies. Membership of expert and advisory committees / groups Member of IPCC WG 3 (Since 2018) Member of OFGEM RIIO-2 Challenging Group (since 2018) Member of the UK Smart System Forum (since 2017) Member of EU ETIP-SNET WG1 (since 2017) Co-chair of Action Cluster on Sustainable Districts & Built Environment of the EU Smart Cities Market Place (2014-2017) Member of UK Government Panel of Technical Experts for Electrcity Market Reform implementation ( 2014-2019) Member of the Steering Committee of the SmartGrids European Technology Platform (2013 - 2016) Director of the UK Centre for Grid Scale Energy Storage, funded by EPSRC – capital grant for energy storage, (2014 - 2017) Member of IET Power Networks Joint Expert Group (since 2012) Member of Scientific Advisory Committee of Research Councils UK Energy Programme (2011-2013) Member of Academic Panel of Advisors to Office for Gas Electricity Market, Electricity Capacity Assessment (2012, 2013) Member of the EU Expert Group on Integration of EU Balancing Markets, formed by the Agency for the Cooperation of Energy Regulators, ACER, (2011 -2012) Providing evidence to House of Commons Select Committee on Energy and Climate Change - UK Energy Supply: Security or Independence? (May 2011) Member of the International Council on Large Electric Systems (CIGRE) - Study Committee on Distribution Networks and Distributed Generation, representing UK (since 2010) Director of the UK Centre for Sustainable Electricity and Distributed Generation (funded by then DTI and BERR), collaboration between Imperial, Strathclyde and Cardiff University (until 2010) Special Advisor to House of Commons Select Committee on Energy and Climate Change: The future of Britain's electricity networks (2009-2010) Member of the National Technical Committee of the Conference on Electricity Distribution (CIRED) and Reporter for Section 4 on Distributed Energy Resources (since 2009) Providing evidence to House of Lords Select Committee on European Union, Renewables Obligation and delivery of Renewable Electricity (April 2008) Member of the Review Group of the Great Britain Security and Quality of Supply Standard (2008-2010) Member of Annex 25 of the International Energy Agency - Power Systems with Large Amounts of Wind Power (Since 2007) Member of the International Atomic Energy Agency Working Group on Methodologies and Analytical Tools for Sustainable Energy Development (2005-2012) Member of Annex 23 of the International Energy Agency - Power Systems Offshore Wind Technology and Deployment (2005-2009) Member of the IEEE PES System Economics SubCommittee (since 2005) Journal Editorial Member of the Editorial Board of the International Journal of Electric Power & Energy Systems (Since 2016) Member of the Editorial Board of the International Journal on Foundations and Trends in Electric Energy Systems (Since 2015) Member of the Editorial Board of the International Journal on Applied Energy (Since 2014) Member of the Editorial Board of the International Journal on Energy Storage (Since 2014) Member of the Editorial Board of the International Journal on Electric Power System Research (2005-2013) Associate Editor of the International Journal of Distributed Energy Resources and Smart Grids (Since 2005) Member of the Editorial Board of the IET Journal on Renewable Power Generation (Since 2007)

Prof. Domb is currently the head of the Computer Science Department of the Ashkelon Academy College. He graduated from Technion in Israel with a DSc in Operations Research Engineering. He holds an MSc from New York University (NYU) Currant Institute of Mathematical Sciences, an MA in Computer Science from Queens College NY, and an MBA from Tel-Aviv University. Post-doctorate done at Washington University in St. Louis. He has over 30 years of academic research in Cyber Security, Data Networks, and IoT. In parallel, he worked in the IT industry for over 35 years. He has experience in various technical and executive positions in large international IT companies in the Telecom, Health, Security, Finance, and Government domains.

Professor. Dr. Saim Memon, CEO and Industrial Professor of Renewable Energy Engineering, unifies academic research, industrial manufacturing, and global product distribution. A Chartered Engineer and Fellow of the Higher Education Academy, he holds Qualified Teacher Status from the General Teaching Council for Scotland. Prof. Memon boasts multidisciplinary expertise in Electrical, Mechanical, and Renewable Energy Engineering, with over 120 research publications and 50+ speakerships, engaged in research with 40+ countries worldwide. He taught 41 modules, supervised numerous PhD and MSc/MEng projects, and collaborated with researchers in 40+ countries. His work has acquired 1600+ citations, a 23+ h-index, and a 52+ i10-index. His specific research experiences encompass net-zero energy buildings, vacuum insulation, thermal management of electric vehicle batteries, translucent vacuum insulation panels, energy materials for vacuum insulated smart windows, , vacuum-based photovoltaic solar thermal collectors, applied semi-transparent photovoltaics and switchable films, renewable energy technologies, thermoelectric devices for energy harvesting and smart grid integration into electric vehicles with fast-charging battery mechanisms.

Zhiquan Liu is a full professor with the College of Cyber Security, Jinan University. In recent years, Prof. Liu has published more than 80 SCI/EI-indexed papers on authoritative journals and conferences (including more than 40 papers on CCF-A/JCR-1/TOP journals, 4 best papers on international conferences, 2 most popular papers on international journals, and 1 ESI highly cited paper), and has applied for/been authorized more than 100 invention patents and PCT patents. Besides, Prof. Liu has served as the Chair, Co-Chair, Program Committee Chair, Publication Chair, Publicity Chair, Finance Chair, Workshop Chair, or Program Committee Member for more than 20 international conferences. Meanwhile, Prof. Liu has served as the editor-in-chief of Advances in Transportation and Logistics, and has served as the area editor, associate editor, or academic editor for more than 10 SCI-indexed journals. His homepage is https://www.zqliu.com

Dr. Rostand Tayong is a Senior Lecturer in Automotive Engineering at the University of Bedfordshire (United Kingdom). His research activities encompass Automotive and Mechanical Engineering, Materials Testing and Characterisation, Acoustics and Vibration methods. His main work focuses on composite materials with an emphasis on 3D woven composites. He has (co-)authored more than 40 publications including book chapter contributions, journal articles and conference proceedings. Prior to his present position, Dr Rostand Tayong worked at the University of Bristol (United Kingdom) as a Research Associate. He has been the Principal Investigator (PI) for many funded research projects including some Engineering and Physical Sciences Research Council (EPSRC) funded projects which aimed at characterising 3D Woven Composite materials using ultrasound methods. He was awarded many recognitions and prizes including the young scientist grant 2012 from the European Acoustics Association (EAA), the international young scientist grant 2012 from the International Noise Control Engineering (INCE, InterNoise) and the 2018 best presentation at the Early Career Researcher Event organized by the Research Centre in Non-Destructive Evaluation (RCNDE) in Nottingham (United Kingdom). He serves as Editorial board member and reviewer for various international scientific journals.

Dr Florimond Guéniat (FG) is Assoc Prof and College Lead for manufacturing, mech and auto engineering in the College of Engineering at Birmingham City University. He is also a committee member of the IET Artificial intelligence technical network. He is a researcher in applied mathematics and computer science, with a focus on modeling and controlling complex systems with substantial experience in Machine Learning (ML) and data-driven modeling techniques. The focus of his research is on emhancing energy efficiency for both sustainable transport and energy production. He is the author of more than 40 publications. Before joining BCU, he was a Research Associate at University of Illinois at Urbana Champaign, USA. FG worked for two years in the Department of Mathematics at Florida State University, USA, where he developed ML methodologies for the control of complex systems. His doctoral studies, at Paris Saclay University, France, focused on data-driven methods, High Performance Computing (HPC) and data visualization

Dr. Salah-ddine Krit is currently Full Professor of computer science at Ibnou Zohr University Agadir morocco, Dr. Krit is currently the Chief of Department of Informatics (2022-2026), Director of Laboratory (Lab.SIE 2018-2022), Chief of Department (MIG 2015-2020 ). Pr. Krit received the Ph.D degrees in ICT and Software Engineering from FSDM university, Fez, Morroco. in 2004 and 2010, respectively, he worked as an engineer Team leader in ICT and Hardware Engineering, audio and power management Integrated Circuits (ICs) Research, Design verification, simulation and layout (DRC, LVS) of analog and digital blocks dedicated for mobile phone and satellite communication systems using Cadence, Eldo, Orcad, VHDL-AMS technology, eploying Windows Server Desktop, Managing Active Directory objects, including users, computers, groups, Administring Windows Server Group Policy settings and preferences, Implementing and Managing DHCP on Windows Server, topics such as DHCP Failover, DHCP Split-Scope with Texas Instrument USA, Atmel, on semiconductor, Freescale France, Lactals canada.

Prof. Dai-Yeun Jeong is presently the Director of Asia Climate Change Education Center and an emeritus prof. of environmental sociology at Jeju National University in South Korea. He received BA and MA degree in sociology from Korea University (South Korea), and PhD in environmental sociology from University of Queensland (Australia). He was a prof. of environmental sociology at Jeju National University (South Korea) from 1981 to 2012. His past major professional activities include a teaching professor at University of Sheffield in UK, the president of Asia-Pacific Sociological Association, a delegate of South Korean Government to UNFCCC and OECD environmental meeting, and a member of Presidential Commission on Sustainable Development Republic of Korea, etc. He has published 60 environment-related research papers in domestic and international journals and 13 books including Environmental Sociology. He has conducted 100 unpublished environment-related research projects funded by domestic and international organizations.

ENERITZ BARREIRO. Head of Urban Ecosystem. Business developer of Buildings and Infrastructure of TECNALIA Research & Innovation Architect, graduated in the Basque Country University, and specialized in building technology; MBA in the Basque Country University, MsC. in Sustainable Construction Techniques and Energy Efficient Buildings Design (University of Alfonso X el Sabio, Madrid). Her professional experience is focused on energy efficient urban and building design since 2004, dealing with sustainable urban and low energy buildings design and retrofitting and integration of innovative and sustainable solutions. Expert in thermal modelling and simulation of innovative construction solutions for building integration. She is currently a Responsible of Urban Ecosystem Strategy and Business developer of Buildings and Infrastructure area, having taken part in several projects related to construction automation and digital twins for construction, modeling and building and infrastructure operation.

Prof. Hendry Izaac ELiM, Ph.D (NUS), a current leader of ELIM Advanced Technology (EAT) Lab. (2024) is developing his idea according to the motto: "Excellent wisdom in our spirit & excellent knowledge in our soul". Based on the implemented idea of "PHYSICS is a Genius SCIENCE" (since 1997), (URL: https://fisika.fmipa.unpatti.ac.id/profhendryelim/ ), he has been a creative and innovative as well as disruptive simple Indonesia physicist with the theoretical B.Sc and M.Sc physics background from 2 best Indonesia university of Gadjah Mada (UGM) and Bandung Institute of Technology (ITB), respectively.Furthermore, He has conducted a series of multitasking scientific development of nanoscience, nanotechnology and herbal nanomedicine under the world wide collaborations with many different international scholars in the last 34 years consisted of a distinguished 6 years nonlinear optics research background in his Ph.D and postdoctoral works at NUS, Singapore and 4.5 years position as a research professor in a mega-project of superhybrid materials at Institute of Multidisciplinary Research for Advanced Materials (IMRAM), Tohoku university, Japan. In addition, Dr. Elim, the founder of the first Nanotechnology Research Center and Innovative Creation (PPNRI, URL: https://lppm.unpatti.ac.id/profil-ppnri-2020/) in the eastern part of Indonesia has educated over 93 physics research and postgraduate students in the last 8 years as soon as his opening of laboratory of nanomaterials for photonics nanotechnology (Lab. N4PN) in 2014 and PPNRI at Pattimura university on 24th April 2015, respectively.Prof. Elim and his co-authors invented so many novelty nonlinear optical, optical limiting and ultrafast behaviors particularly on various nanostructures materials such as carbon superchips of fullerene derivatives, carbon nanoparticles, metallic nanostructures like rod and nanoparticles such as Gold and Silver, coated metallic and semiconducting carbon nanotubes, as well as super hybrid materials of PbS-Au, CNT-ZnO2, TiO2 nanoparticles-polymers, and so forth. Such works have been finally sustained by the newly improvement of Z-scan imaging method developed by himself.Therefore, Dr. Elim has achieved an incredible output of over 101 high quality works, text books and few chapter books published in over 34 Q1 journals according to Web of Science / SCOPUS/ SINTA with h index of 27 and citation of OVER 4401 in Google scholar (in December 2023). Due to his incredible achievements in a small island of Ambon, Indonesia, Dr. Elim had received at least 2 main important awards of 2017 best Indonesia scientist from Pattimura university rector and silver medal of XX Satya Lancana Karya Satya from President of Indonesia, respectively. In November 2021, Dr. Elim has been ranked as the 3th best Indonesia pure physicist and 30th best natural Indonesia scientist based on AD Scientific index.In addition, Dr. Elim has served many different scientific communities as Editor-in-Chief of 2 international journals of Science Nature & Pattimura Excellence Journal of Language and Culture and associate editor in Analytical chemistry Letters as well as international meetings of symposium, webinar (daring system of talks) and conference as well as expo/ exhibition as contributed speaker, keynote speaker, and plenary speaker in many different countries such as Indonesia, Singapore, Japan, Germany, USA, India, and Africa, respectively.Since 2023, Prof. Elim has already been a well-known popular writer in a very big NEWS PAPER Blog of Kompasiana, Indonesia with his ~89 interesting articles and videos among active 4.2 million active simple writers. He is also a section editor of book in a top Springer Nature publishing company.The scientific impacts among worldwide populations have made Prof. Elim as an inspired scholar, inventor and innovator, respectively.Currently, Prof. H.I. Elim is carrying out his visiting professor journey all around the world with his FAITH & Mercy based on his best PHYSICS background.

Dr. Wael A. Altabey is a research associate professor since 2018 at International Institute for Urban Systems Engineering (IIUSE), Southeast University, Nanjing, China, and National and Local Joint Engineering Research Center for Basalt Fiber Production and Application Technology, Southeast University, Nanjing, Jiangsu, China, after completing a postdoctoral research fellowship for two years (2016-2018), Before that he was an Associate professor at department of Mechanical Engineering, Alexandria University, Alexandria, Egypt. Since 2016 his researches have focused on the utilization of Artificial Intelligence (AI) based schemes for structural health monitoring (SHM) and Non-Destructive Testing (NDT) for damage classification, detection, diagnosis, prediction, and dynamic response analysis in composite, and steel Structures (such as aircraft, wind turbines, pipes, bridges and industrial machines) at National and Local Joint Engineering Research Center for Basalt Fiber Production and Application Technology, Southeast University, Nanjing, Jiangsu, China. This is the only national R&D platform awarded by the National Development and Reform Commission in this industry with more than 30 national authorized patents. The center's international and national awards indicators have reached international and local leading levels and filling many technical gaps in China. He participated in several research activities, which achieved from NSFC and private sectors. He listed in Stanford List of World's Top 2% Scientists from 2020, until now. He was a research fellowship at INTI International University & Colleges, Kuala Lumpur, Malaysia, from 15 October 2023 to 31 Dec 2025. He is Member in Intelligent and Resilient Infrastructure (IRI) Center, this is the official center affiliated with the Southeast-Leeds-Cambridge universities collaboration program. He was research scientist at Nanjing Zhixing Information Technology Co., Ltd., Nanjing, Jiangsu, China, for 6 years. He serves on various technical committees in several international conferences and workshops, guest editor of special Issues in several international scientific journals and on the editorial board of several international scientific journals in the field of artificial intelligence, mechanical, materials, and civil engineering. He a peer reviewer of more than 100 international scientific journals. He is an author and co-author of more than 110 high impact journal papers, 50 scientific conference papers and 30 chapters, 10 academic and research books, patent, and delivered over 40 invited talks.

We will Update soon....

Masood Shahbazi is a highly skilled mechanical engineer with a focus on applied design and dynamic modeling. He is currently working as a Mechanical Engineer, where he applies his technical expertise in the engineering office of industrial machinery. Masood's academic journey commenced at Razi University, where he earned his Bachelor's degree in Mechanical Engineering in 2015, followed by a Master’s degree in Mechanical Engineering - Applied Design in 2018. His impressive academic performance is reflected in a GPA of 18.04/20, placing him among the top ranks of his class. During his studies, Masood conducted significant research, particularly on low-velocity impact analysis of sandwich beams with soft cores and carbon nanotube (CNT) reinforced face sheets, showcasing his proficiency in combining theoretical concepts with practical applications. His commitment to the field extends beyond personal achievement; he has served as a teaching assistant for various courses at Razi University, contributing to the education of future engineers by sharing his knowledge in advanced strength of materials and the impact on sandwich panels. Masood’s career trajectory is defined by a blend of professional experience and scholarly engagement. He has contributed to various projects and roles, including serving as a mechanical engineer for technical examination inspections of light and heavy vehicles and a quality control inspector in the steel manufacturing industry. His role as a freelancer from 2019 to 2024 further demonstrates his versatility and adeptness in managing teams and projects. With a wealth of experience in cutting-edge software tools like CATIA, SOLIDWORKS, and MATLAB, Masood has successfully executed academic and industrial projects. Highlights include the design and simulation of a smart motion glove prototype, a Gough-Stewart platform, and various dynamic systems simulations. His proficiency in these software platforms underscores his capability to lead intricate projects from concept to realization. An active participant in academic circles, Masood has organized and contributed to various engineering conferences, fostering dialogue and innovation within the mechanical engineering community. His commitment to education and professional development is further highlighted by his involvement in workshops focused on entrepreneurship and business operations. An advocate for continuous learning, Masood has published research on dynamic parameter optimization of a Stewart platform and the response of low-velocity impacts on cantilever sandwich beams. His research interests also encompass robotics and the design and manufacturing of mechanical components, indicating a broad expertise that spans both theoretical analysis and practical application. Masood’s linguistic proficiency in English, Persian, and Kurdish, complemented by an IELTS score of 7, allows him to communicate effectively in diverse environments. Outside his professional life, Masood enjoys reading and engaging in sports such as soccer and swimming, embodying a well-rounded personality that values both intellectual growth and physical activity. As he takes on new challenges and opportunities within the engineering landscape, Masood Shahbazi exemplifies the commitment to innovation and excellence that characterizes the field of mechanical engineering

we will update it soon....

we will update it soon...

Prof David Towers is an Engineer by training and with a mix of experience across industry and academia. He served an apprenticeship in the aerospace sector, returned to academia to study for a PhD in optical diagnostics and then worked for 10 years in the automotive industry before becoming an academic in 2000. I retain a passion for a general engineering education and that remains the focus of our teaching at Warwick University. My research is centred on performing basic and applied work in optical sensing technologies with applications across engineering, the biological sciences and clinical practice. The research is frequently multi-disciplinary and I have worked closely with collaborators across engineering, physical science, biology and with clinicians. Through our work in structural mechanics instruments have been developed for full field vibration, deformation and surface topography measurement. Our research outputs in this field have established fundamental measurement science, reported in, for example Optics Letters and Optics Express, as well as patents, commercial instrumentation systems and £M benefits to industry in terms of enhanced designs and reduced costs. More recently, we have explored technology translation to healthcare applications, for example, imaging particles for full field flow velocimetry has led to organelle tracking in live cell imaging and mosquito imaging to quantify malaria vector behaviour in their natural habitat. I have served as Head of Department for the School of Engineering at Warwick University from 2017 until 2023 growing the department through introduction of degree apprenticeship programmes and the department achieved an improved outcome in the UK’s Research Excellence Framework (REF) in 2021. I continue to provide input to a number of University level working groups.

we will update soon.